Tail Section for US D-96 Depth integrating suspended hand line sampler

HIF/FISP Part # 4107116

The US D-96 is a collapsible-bag suspended-sediment/water-quality sampler capable of collecting a 3-liter sample. It is 35 in long, weighs 132 lbs, and has a hollow cavity inside the sampler body. It is fabricated from bronze and aluminum castings with a high-density polyethylene tail. All metal parts are plastic coated. The sampler employs a sliding tray that supports the bag and holds the nozzle holder with nozzle in place. The bag is attached to the nozzle holder with a hook-and-loop strap. The sampler uses a plastic or TFE nozzle and a plastic or PFA bag as the sample container. The US D-96 meets the protocol for water-quality sampling as outlined in the USGS’s National Field Manual for the Collection of Water-Quality Data. The sampler is protected by US Patent No. 6,216,549 B1.

Tail Section 4107116

The US D-96 sampler will collect acceptable flow-weighted samples in streams velocities ranging from 2.0 to 12.5 ft/sec. Extreme care should be practiced when deploying the sampler at stream velocities above 10 ft/sec. The US D-96 sampler is capable of sampling to a depth of 39 ft with a 5/16-in internal diameter nozzle, 60 ft with a 1/4 in internal diameter nozzle, and 110 ft with a 3/16-in internal diameter nozzle. The unsampled zone using the US D-96 sampler 4 in. HIF Repairable.

Where and how the sampler is deployed in the field is as important as the fundamental design of the sampler. Additional information about how to properly use this sampler can be found in the following references:

Edwards, T.K., and Glysson, G.D., 1999, Field Methods for Measurement of Fluvial Sediment: U.S. Geological Survey Techniques of Water Resources Investigations, book 3 chapter C2, 89 p.

Wilde, F.D., Radtke, D.B., Gibs, J., and Iwatsubo, R.T., 1998, National Field Manual for the Collection of Water-Quality Data: U.S. Geological Survey Techniques of Water-Resources Investigations, Selection of Equipment for Water Sampling, book 9, chap. A27, available at: http://pubs.usgs.gov/twri/.

Associated Components

4107003 ADAPTER SLEEVE, PINT
4107007 BAG, PFA FOR D-96 & D-96-A1
4107008 BAGS, PLASTIC (20) D-96 & D-96-A1
4107055 HANGER BAR AND PIN
4107070 NOZZLE, 3/16, WHITE PLASTIC (1372) FOR D-96
4107071 NOZZLE, 1/4, PLASTIC (1373) FOR D-96
4107072 NOZZLE, 5/16, PLASTIC (1374) FOR D-96
4107074 NOZZLE, 3/16, TFE (1376) FOR D-96
4107075 NOZZLE, 1/4, TFE (001377) FOR D-96
4107076 NOZZLE, 5/16, TFE (1378) FOR D-96
4107077 NOZZLE HOLDER, TFE (1379) FOR D-96
4107078 NOZZLE HOLDER, PLASTIC (1375) FOR D-96
4107112 STRAP, BAG-RETENTION (1370H)
4107118 TRAY, SLIDING, COMPLETE (001370E)
4107119 TRAY, PLASTIC, REPLACEMENT