USGS - science for a changing world

Federal Interagency Sedimentation Project (FISP)

FISP Sponsors   USGS Logo    BOR Logo    USACE Logo    USDA Logo    USFS Logo    USEPA Logo    BLM Logo    HIF Logo>

FISP Home Home FISP Background Background FISP Catalog Sampler Catalog FISP Research Research FISP Publications Publications FISP Contact Contact Us

 

US DH-95 Depth integrating suspended hand line sampler

 

HIF/FISP Part # 4101014

 
*Call the HIF at (800) 382-0634 for final pricing and ordering.

The US DH-95 is a hand-line suspended-sediment/water-quality sampler. The sampler can be lowered and raised, hand over hand, with a flexible suspension line. The US DH-95 meets the protocols for water-quality sampling as outlined in the USGS’s National Field Manual for the Collection of Water-Quality Data7. The sampler can be used in stream depths up to 15 ft and in stream velocities ranging from 1.7 to 7.4 ft/sec.

 

 

The US DH-95 weighs approximately 29 lbs and is 22 in long with the bottle, cap, and nozzle in place. The bottle cavity is machined from a low-lead bronze casting that is coated with plastic. The tail section is made of high-density polyethylene plastic. The sampler is designed to use a 1-liter Teflon or plastic bottle mated to the US D-95 Cap or US D-77 sampler cap and nozzle. Plastic and TFE nozzles with 3/16-, 1/4-, and 5/16-in internal diameter are available. The recommended sample volume to be collected with the US DH-95 sampler is 800 ml. The unsampled zone using the US DH-95 is 4.8 in.

Includes case, hangar bar, strap, and O-ring retainer. HIF Repairable.

Where and how the sampler is deployed in the field is as important as the fundamental design of the sampler. Additional information about how to properly use this sampler can be found in the following references:

Edwards, T.K., and Glysson, G.D., 1999, Field Methods for Measurement of Fluvial Sediment: U.S. Geological Survey Techniques of Water Resources Investigations, book 3 chapter C2, 89 p.

A copy of operating instructions titled “Sampling with the US D-95TM Depth-Integrating Suspended-Sediment Sampler” (http://water.usgs.gov/fisp/docs/Instructions_US_D-95_000608.pdf) is provided with each sampler.


Associated Components

4107002 ADAPTER, DH-81A (2010)
4107020 BOTTLE, 1-LITER, HEAVY GRADE
4107021 BOTTLE, 1 LITER, TEFLON
4107034 CAP, PLASTIC
4107036 NOZZLE HOLDER CAP, TEFLON, US D-95
4107037 CAP, REPLACEMENT, 1-LITER
4107055 HANGER BAR AND PIN
4107084 NOZZLE, 3/16, PLASTIC (2270) FOR D-77, DH-81, D-95 AND DH-95
4107085 NOZZLE, 1/4, WHITE PLASTIC (2280) FOR D-77, DH-81, D-95, AND DH-95
4107086 NOZZLE, 5/16, WHITE PLASTIC (2290) FOR D-77, DH-81, D-95, AND DH-95
4107087 NOZZLE, 3/16, TFE (2310) FOR D-77, DH-81, D-95, AND DH-95
4107088 NOZZLE, 1/4, TFE (2320) FOR D-77, DH-81, D-95, AND DH-95
4107089 NOZZLE, 5/16, TFE (002330) FOR D-77, DH-81, D-95, AND DH-95
4107109 O-RING FOR BOTTLE FOR DH-95 & D-95
4107115 TAIL SECTION FOR DH-95 SAMPLER


USGS Home Water Resources Biology Geography Geology Geospatial

Accessibility FOIA Privacy Policies and Notices

Take Pride in America logo USA.gov logo U.S. Department of the Interior | U.S. Geological Survey
URL: http://water.usgs.gov/fisp/products/4101014.html
Page Contact Information: USGS Office of Surface Water
Page Last Modified: Friday, 07-Dec-2018 17:44:00 EST