Online Guide to MODFLOW-LGR

Name File

Hide Navigation Pane

Name File

Previous topic Next topic No directory for this topic Expand/collapse all hidden text  

Name File

Previous topic Next topic Topic directory requires JavaScript JavaScript is required for expanding text JavaScript is required for the print function  

Purpose

The Name File specifies the names of the input and output files, associates each file name with a unit number and identifies the packages that will be used in the model.

Documentation

Supported in

MODFLOW-2000
MODFLOW-2005
MODFLOW-LGR
MODFLOW-CFP
MODFLOW-NWT

Other Notes

Space characters are not allowed in Fname.
Lines in the name file are limited to 300 characters.

Input Instructions

The name file contains the names of most input and output files used in a model simulation and controls the parts of the model program that are active. (“OPEN/CLOSE” files, described in the Input Instructions for Array Reading Utility Modules section, are not included in the name file.) The name file is read on unit 99. The name file is constructed as follows.

FOR EACH SIMULATION

Data Set 1

Ftype Nunit Fname  [Option]

Ftype—is the file type, which must be one of the following character values. Ftype may be entered in all uppercase, all lowercase, or any combination.

GLOBAL for the global listing file—if this type is not present, the LIST file is used for the global listing file as well as for the forward run listing file. (MODFLOW-2000 only)
LIST for the forward run listing file—if this type is not present, the GLOBAL file is used for the forward run listing file as well as for the global listing file.

The name file must always include a record that specifies GLOBAL or LIST for Ftype. Both records can be included, and if so, the GLOBAL record must be the first non-comment record and the LIST record must be the second non-comment record. If only one of the records is included, it must be the first non-comment record.

DIS for the discretization file
MULT for the multiplier array file
ZONE for the zone array
PVAL for the Parameter Value file
BAS6 for the Groundwater Flow Process Basic Package
OC for the Groundwater Flow Process Output Control Option
BCF6 for the Groundwater Flow Process Block-Centered Flow Package
LPF for the Groundwater Flow Process Layer Property Flow Package
HUF2 for the Hydrogeologic Unit Flow Package
UPW for the Upstream Weighting Package (MODFLOW-NWT only)
HFB6 for the Groundwater Flow Process Horizontal Flow Barrier Package
UZF for the Groundwater Flow Process Unsaturated-Zone Flow Package
RCH for the Groundwater Flow Process Recharge Package
RIV for the Groundwater Flow Process River Package
WEL for the Groundwater Flow Process Well Package
DRN for the Groundwater Flow Process Drain Package
GHB for the Groundwater Flow Process General-Head Boundary Package
EVT for the Groundwater Flow Process Evapotranspiration Package
CHD for the Groundwater Flow Process Time-Variant Specified-Head Package
SIP for the Strongly Implicit Procedure Package
SOR for the Slice-Successive Over-Relaxation Package
PCG for the Preconditioned Conjugate-Gradient Package
DE4 for the Direct Solution Package
IBS for the Interbed-Storage Package
LMG for the Link-AMG Package
NWT for the Newton Solver (MODFLOW-NWT only)
LAK for the Lake Package
GAGE for the Gage Package
ETS for the Evapotranspiration Segments Package
DRT for the Drain Return Package
FHB for the Flow and Head Boundary Package
HYD for the HYDMOD Package
RES for the Reservoir Package
MNW for the Multi-Node, Drawdown-Limited Well Package
MNW2 for the Multi-Node Well Package version 2.
MNWI for the Multi-Node Well Information Package
DAF for the DAFLOW Package surface-water input file
DAFG for the DAFLOW Package groundwater input file
STR for the Stream Package
SFR for the Streamflow-Routing Package
KDEP for the Hydraulic-Conductivity Depth-Dependence Capability of the HUF2 Package
LVDA for the Model-Layer Variable-Direction Horizontal Anisotropy capability of the HUF2 Package
SUB for the Subsidence and Aquifer-System Compaction Package
SWI2 for the Saltwater Intrusion Package
LMT6 for the Link-MT3DMS Package
OBS for the main Observation Process input file (MODFLOW-2000 only)
ADV2 for the Advective-Transport Observation Input File (MODFLOW-2000 only)
CHOB for the Constant-Head Flow Observation Input File
DROB for the Drain Observation Input File
DTOB for the Drain Return Observation Input File (MODFLOW-2000 only)
GBOB for the General-Head-Boundary Observation Input File
HOB for the Head-Observation Input File
RVOB for the River Observation Input File
STOB for the Streamflow-Routing Observation Input File (MODFLOW-2000 only)
CFP for the Conduit Flow Process (MODFLOW-CFP only)
CRCH for the Conduit Recharge Package (MODFLOW-CFP only)
COC for the Conduit Output Control File (MODFLOW-CFP only)
SEN for the Sensitivity Process input file (MODFLOW-2000 only)
PES for the Parameter Estimation Process input file (MODFLOW-2000 only)
FMP for the Farm Process (MODFLOW-OWHM only)
RIP for the Riparian Evapotranspirtion package (MODFLOW-OWHM only)
CFP for Conduit Flow Process (MODFLOW-CFP only)
CRCH for Conduit Recharge (MODFLOW-CFP only)
COC for Conduit Output Control (MODFLOW-CFP only)
DATA(BINARY) for binary (unformatted) files, such as those used to save cell-by-cell budget data and binary (unformatted) head and drawdown data. Files of this type are rewound at the start of each parameter-estimation iteration.
DATA for formatted (text) files, such as those used to save formatted head and drawdown and for input of data from files that are separate from the primary package input files. Files of this type are rewound at the start of each parameter-estimation iteration.
DATAGLO(BINARY) for binary (unformatted) files, such as those used to save cell-by-cell budget data and binary (unformatted) head and drawdown data. Files of this type are not rewound at the start of each parameter-estimation iteration;. that is, output from each successive parameter iteration accumulates rather than overwriting information from the previous iteration.
DATAGLO for formatted (text) files, such as those used to save formatted head and drawdown and for input of data from files that are separate from the primary package input files. Files of this type are not rewound at the start of each parameter-estimation iteration; that is, output from each successive parameter iteration accumulates rather than overwriting information from the previous iteration.

Nunit—is the Fortran unit to be used when reading from or writing to the file. Any legal unit number on the computer being used can be specified except units 96-99. Unit 99 is used for the name file and for reading multi-valued variables using the OPEN/CLOSE option of the utility modules (see Input Instructions for Array Reading Utility Modules section). Units 97 and 98 are used for batch files as explained in the ‘Running MODFLOW-2000’ section. (p. 42 of the documentation.) Unit 96 is used for a file to which error messages may be written when the Sensitivity Process is active. The Farm Process uses unit numbers 1001 through 1011 internally. The unit numbers used for pipe output by the Conduit Output Control File are numbered sequentially starting at 201 and the unit number used for output of the information about turbulent or laminer flow is 999. The unit number for each file must be unique.

Fname—is the name of the file, which is a character value. Pathnames may be specified as part of Fname. However, space characters are not allowed in Fname.

Option—New options for the name file allow users to designate files of type DATA, DATA(BINARY), DATAGLO, or DATAGLO(BINARY) as either input or output files.  One of the options (either "OLD" for an input file or "REPLACE" for an output file) may be placed after the file name on the line listing the file type, unit number, and file name.  If "OLD" is specified, the file must exist when the program is started.  If "REPLACE" is specified and the file exists when the program is started, the existing file is deleted, then opened.  The status of each file ("OLD", "REPLACE", or "UNKNOWN") is now shown in the global output file.  Note that the "OLD" or "REPLACE" option is not required.  If neither is listed, the file status is shown as "UNKNOWN" and program execution continues normally.  When output to a BINARY file from an earlier model run exceeds the amount of output generated by the current model run, specifying "REPLACE" may be required to ensure the file does not include output from the previous run after the output generated by the current run.  The options may be entered in any combination of uppercase and lowercase letters.

If a parallel version of MODFLOW-2000 is used, the REPLACE option should be used with output files.

The name file contains one of the above records (item 1) for each file. All variables are free format. The length of each record must be 199 characters or less. The records can be in any order except for records where Ftype (file type) is “GLOBAL” or “LIST” as described above.

Comment records are indicated by the # character in column one and can be located anywhere in the file. Any text characters can follow the # character. Comment records have no effect on the simulation; their purpose is to allow users to provide documentation about a particular simulation. All comment records after the first item-1 record are written in the listing file.