Data Set 0

[#Text]
Item 0 is optional and can include as many lines as desired. Each line needs to begin with the “#” character in the first column.
Text—is a character string (maximum of 79 characters) that starts in column 2. Any characters can be included in Text. The “#” character needs to be in column 1. Text is printed when the file is read and provides an opportunity for the user to include information about the model both in the input file and the associated output file.


Data Set 1


NQCH NQCCH NQTCH (free format)


NQCH NQCCH NQTCH IUCHOBSV [NOPRINT] (free format)


NQCH NQCCH NQTCH IUCHOBSV (free format)

NQCH—is the number of cell groups for which constanthead flow observations are listed. A group consists of the cells needed to represent one flow measurement (eq. 9).

NQCCH—is greater than or equal to the total number of cells in all groups. NQCCH must be greater than or equal to the sum of all NQCLCH.

NQTCH—is the total number of constanthead flow observations for all cell groups. NQTCH must equal the sum of all NQOBCH, which are specified in repetitions of item 3 in the input file.

IUCHOBSV—File unit for saving observation data in a file. Specify 0 for no observation output file. The file for this unit must be included as type “DATA” in the Name File.

NOPRINT—is an option keyword that turns off printing of input and output data in the Listing File.



Data Set 2


TOMULTCH EVFCH IOWTQCH (free format)


TOMULTCH (free format)

TOMULTCH—is the timeoffset multiplier for constanthead flow observations [ or T/T]. The product of TOMULTCH and TOFFSET must produce a time value with units that are consistent with the other model input. TOMULTCH can be dimensionless or can be used to convert the units of TOFFSET to the time unit used in the simulation.

EVFCH— is the error variance multiplier for constanthead flow observations, and is used to calculate the weights as described below in the explanation of STATISTIC. EVFCH makes it easy to change the weights uniformly for all constanthead flow observations.

IOWTQCH—is a flag that indicates that the variancecovariance matrix on constanthead flow observations used to calculate the weighting is to be read into array WTQ. If IOWTQCH equals zero, weights are assigned using STATISTIC of item 4; if it is greater than zero, items 6 and 7 are read.



Read items 3, 4, and 5 for each of NQCH groups of cells for which constanthead flow observations are to be specified.

Data Set 3

NQOBCH NQCLCH (free format)
NQOBCH—is the number of times at which flows are observed for the group of constanthead cells.

NQCLCH—is a flag, and the absolute value of NQCLCH is the number of cells in the group. If NQCLCH is less than zero, FACTOR = 1.0 for all cells in the group.



Data Set 4


OBSNAM IREFSP TOFFSET HOBS STATISTIC STATFLAG PLOTSYMBOL (free format)


OBSNAM IREFSP TOFFSET FLWOBS (free format)

Read item 4 for each of NQOBCH observation times for this group of cells. STATISTIC and STATFLAG are ignored if IOWTQCH is greater than zero.
OBSNAM—is a string of 1 to 12 nonblank characters used to identify the observation. The current version of MODFLOW2000 (v 1.17.02) accepts duplicate observation names, but if duplicate names are found, a warning concerning the duplication is written to the Global file.

IREFSP—is the reference stress period to which the observation time is referenced. The reference point is the beginning of this stress period.

TOFFSET—is the time offset of the observation, from the beginning of stress period IREFSP [T]. TOFFSET must be in units such that the product of TOMULTCH and TOFFSET is in time units consistent with other model input. TOFFSET and TOMULTCH from the CHOB file and values of PERLEN, NSTP, and TSMULT from the Discretization file (Harbaugh and others, 2000) are used to determine the stress period, time step, and time during the time step for the observation. To specify that an observation is for a steadystate model solution, specify IREFSP as the stressperiod number of the steadystate stress period, and specify TOFFSET such that the product TOMULTCH * TOFFSET is less than or equal to PERLEN for the stress period; if PERLEN is zero, set TOFFSET to zero. If the observation falls within a time step, the simulated equivalent is calculated by linearly interpolating between values for the beginning and end of the time step. If the first stress period is transient and the observation falls within the first time step, the simulated equivalent from the end of the time step is used because no flow from the beginning of the time step is available for interpolation.

HOBS—is the observed constanthead flow into (positive) or out of (negative) the system [L3/T].

FLWOBS—is the observed flow from the constanthead boundary into the aquifer (positive) or the flow from the aquifer into the constanthead boundary (negative) [L3/T].

STATISTIC—is the value from which the weight for the observation is calculated, as determined using STATFLAG. STATISTIC is ignored if IOWTQCH is greater than zero, in which case WTQ of item 7 is used to define the weighting.

STATFLAG—is a flag identifying what STATISTIC is and how the weight is calculated.
•STATFLAG is ignored if IOWTQCH is greater than zero.
•STATFLAG = 0, STATISTIC is a scaled variance [(L3/T)2], weight = 1/(STATISTIC * EVFCH),
•STATFLAG = 1, STATISTIC is a scaled standard deviation [L3/T], weight = 1/(STATISTIC2* EVFCH), and
•STATFLAG = 2, STATISTIC is a scaled coefficient of variation [], weight = 1/[(STATISTIC * HOBS)2* EVFCH]. 
PLOTSYMBOL—is an integer that will be written to output files intended for graphical analysis to allow control of the symbols used when plotting data.



Data Set 5

LAYER ROW COLUMN FACTOR (free format)
Read item 5 for each of NQCLCH cells in this group.
LAYER—is the layer index of a constanthead cell included in the cell group.

ROW—is the row index of a constanthead cell included in the cell group.

COLUMN—is the column index of a constanthead cell included in the cell group.

FACTOR—is the portion of the simulated flow for the cell that is included in the total simulated flow for this cell group (fn of eq. 16).



Read items 6 and 7 if IOWTQCH is greater than 0. Items 6 and 7 are only available in MODFLOW2000.

Data Set 6

FMTIN IPRN (free format)
FMTIN—is the Fortran format to be used in reading each line of the variancecovariance matrix used to calculate the weighting. The format needs to be enclosed in parentheses and needs to accommodate real numbers.

IPRN—is a flag identifying the format in which the variancecovariance matrix is printed. If IPRN is less than zero, the matrix is not printed. Permissible values of IPRN and corresponding formats are:






1

10G12.3

6

5G12.3

2

10G12.4

7

5G12.4

3

9G12.5

8

5G12.5

4

8G13.6

9

4G13.6

5

8G14.7

10

4G14.7




Data Set 7

WTQ(1,1), WTQ(1,2), WTQ(1,3), ... , WTQ(1,NQTCH) (format: FMTIN)
WTQ(2,1), WTQ(2,2), WTQ(2,3), ... , WTQ(2,NQTCH)
...
WTQ(NQTCH,1), WTQ(NQTCH,2), WTQ(NQTCH,3), ... , WTQ(NQTCH,NQTCH)
WTQ—is an NQTCH by NQTCH array containing the variancecovariance matrix on constanthead flow observations [(L3/T)2]. For elements WTQ(I,J), if I ≠ J, WTQ(I,J) is the covariance between observations I and J; if I = J, WTQ(I,J) is the variance of observation I. The variancecovariance matrix is symmetric, but the entire matrix (upper and lower parts) must be entered.

