MODFLOW Hydrogeologic Units Dialog Box

  • Scroll to top of this topic Scroll to Top of Page

  • Print the current topic Print Topic

  • No expanding elements on this page Show/Hide Expanders

The MODFLOW Hydrogeologic Units dialog box is used to define the hydrogeologic units in the Hydrogeologic Unit Flow (HUF2) package. MODFLOW Hydrogeologic Units dialog box is displayed by selecting Model|MODFLOW Hydrogeologic Units...

To define the hydrogeologic units of a MODFLOW model, the user adds or removes hydrogeologic units using the Add hydrogeologic unit Add Layer Group button, Insert hydrogeologic unit Insert Layer Group button, and Delete hydrogeologic unit Delete Layer Group button buttons on the left hand side of the MODFLOW Hydrogeologic Units dialog box.

The main properties of each the hydrogeologic unit is specified by selecting the hydrogeologic unit in the list of hydrogeologic units on the left and entering appropriate values on the tabs to the right. The user can select multiple hydrogeologic units by holding down the Ctrl key when selecting hydrogeologic units.

The MODFLOW Hydrogeologic Units dialog box has three tabs: Properties, Parameters and Print.