US DH-74AL Depth integrating suspended hand line sampler | |
---|---|
HIF/FISP Part # 4101008 | |
*Call the HIF at (800) 382-0634 for final pricing and
ordering.
The US D-74AL is a cable-suspended suspended-sediment sampler. The sampler is lowered and raised by means of a suspension system such as a reel and crane or bridge board. It could also be used with a cableway. The sampler can be used in stream depths up to 15 ft and in stream velocities ranging from 1.5 to 6.6 ft/sec. The sampler has a cast aluminum, streamlined body that is 24 in long and weighs 42 lbs. A pint or quart glass bottle sample container is used with the sampler. The head of the sampler is hinged to permit access to the sample container. Tail vanes are provided to orient the instrument into the stream flow. The US D-74AL uses 3/16- and 1/4- in internal diameter intake nozzles that project into the current for collecting a sample. A port, which points downstream, is located on the side of the sampler head from which air escapes as it is displaced by the sample being collected in the container. The unsampled zone using the US D-74AL is 4.1 in. HIF Repairable. Where and how the sampler is deployed in the field is as important as the fundamental design of the sampler. Additional information about how to properly use this sampler can be found in the following references: Operation instructions are given in D-74 Instruction Manual. SAMPLER, US D-74A1, ALUMINUM VERSION OF D-74. INCLUDES HANGER BAR, PINT BOTTLE ADAPTER, 2 EACH OF 3/16" AND 1/4" NOZZLES, AND 2 GASKETS. The US D-74AL is a cable-suspended suspended-sediment sampler. The sampler is lowered and raised by means of a suspension system such as a reel and crane or bridge board. It could also be used with a cableway. A pint or quart glass bottle sample container is used with the sampler. The head of the sampler is hinged to permit access to the sample container. Tail vanes are provided to orient the instrument into the stream flow. The US D-74AL uses 3/16 and 1/4 internal diameter intake nozzles that project into the current for collecting a sample. A port, which points downstream, is located on the side of the sampler head from which air escapes as it is displaced by the sample being collected in the container. Associated Components
4107003 ADAPTER SLEEVE, PINT |