U.S. Geological Survey                                             seawat(1)



NAME
     SEAWAT - Three-dimensional variable-density ground-water flow model


HISTORY

SEAWAT Version 4.00.05 2012/10/19 - This version of SEAWAT contains fixes for
a problem in the Time-Varying Constant Head Package when the CHDDENSOPT=2
option is used.  A fix was implemented for the General-Head Boundary Package
in which an incorrect density value was used in the budget routine.  A routine
was added to deallocate the memory for VDF variables.  The MT3DMS well
recirculation option did not work with previous SEAWAT versions.  This capability
is now supported in the present SEAWAT version.  MT3DMS contains an error
for solute calculations involving large changes in water storage and large 
time steps.  This error is fixed in the present SEAWAT version.  Also, an
additional mass storage term, "MASS STOR (FLOW MODEL)" is printed to the 
listing file, which contains the mass change due to changes in water storage.
MT3D included this term in the total mass sum, but did not write it to the 
listing file.  Lastly, the density equation of state written to the listing
file did not print correctly if the MT3DMS species numbers were not ordered 
sequentially.  (Thanks to T.N. Olsthoorn for identifying many of these issues.)

SEAWAT Version 4.00.04 2011/02/07 - This version of SEAWAT contains fixes for
a problem in the Drain Observation Package and in the Transport Observation
Package.  In some instances, the Drain Observation Package would report a non-
zero drain flux for a drain that was not receiving water from the aquifer.  The
error was in the Observation Process and not in the head solution or reported
water budgets.  There was also a name conflict in the common statement for the
Transport Observation Package.  It is unclear if this error had any effect on
simulation results.  The 32 and 64-bit executables released with this
distribution were compiled using Intel Visual Fortran Composer, which allows
the programs to run on the Windows 7 operating system.

SEAWAT Version 4.00.03 2009/09/21 - This version of SEAWAT contains fixes for 
a variety of issues encountered since version 4.00.02:  (1) the GMG solver 
had problems converging for problems with rewetting (thanks to Kim Gordon for 
helping identify this problem); (2) the program was updated with MODFLOW 
Version 1.18.01; (3) there was an error in a conditional statement in the DRT 
package that may have affected calculated DRT fluxes; (4) the MNW fluxes 
passed to MT3DMS were offset by one transport time step; (5) the BCF package 
had problems with rewetting, which was caused by the use of HDRY in a 
calculation (thanks to Vincent Post for finding this error); (6) an error was 
corrected in the HUF2 package; (7) if fluid density was specified as a 
function of pressure, densities were incorrectly updated for cells that had 
rewet; (8) all tabs were removed from the SEAWAT source code. An additional 
feature was added to SEAWAT to improve runtimes for variable-density flow and 
solute transport models with many rivers, wells, and/or general-head 
boundaries.  Density is stored with the package array by specifying an 
AUXILIARY variable in the respective flow package using the name WELSSMDENSE, 
RIVSSMDENSE, or GHBSSMDENSE. With this feature, the boundary density is 
calculated only once for each MODFLOW time step and stored in the package array.
This storage occurs right after the SSM routine reads the boundary concentrations.

SEAWAT Version 4.00.02 2008/09/19 - This version of SEAWAT contains fixes for two
memory conflicts.  The first was in the MNW Package.  The second was between
the OBS Process and the Integrated MT3DMS Process.

SEAWAT Version 4.00.01 2008/04/29 - This version of SEAWAT contains a fix for a
minor programming error that may have caused the dcdt term of the flow equation
to be too large.

SEAWAT Version 4.00.00 2008/03/28 - First release of SEAWAT Version 4.  SEAWAT
now contains capability to simulate simultaneous solute and heat transport.  This
SEAWAT version contains MODFLOW Version 1.18.00 and MT3DMS Version 5.2.  This
SEAWAT version also contains fixes for several bugs found in previous SEAWAT 
versions: (1) groundwater fluxes for perched water table conditions with strong 
density variations were not calculated properly; (2) in the budget calculations, 
there was an error in the flux calculated for the front face of constant head cells; 
(3) for mixed steady state and transient simulations, if the first stress period
was specified as steady state, all remaining stress periods were simulated as steady 
state.

SEAWAT-2000 Version 3.13.00 2006/04/21 - This version of SEAWAT was updated with
MODFLOW Version 1.16.00.  Additionally, ETS and DRT are now compatible with the
VDF process.

SEAWAT-2000 Version 3.12.00 2006/03/14 - This version of SEAWAT was updated with
MT3DMS Version 5.10, which includes a new zero-order growth/decay option within
the reactions package.  This option may be useful for simulating groundwater age 
as a separate species.

SEAWAT-2000 Version 3.11.02 2005/09/23 - This version of SEAWAT contains a fix 
for a minor bug that may have caused some transport timesteps to be too short.  
Thanks to Matthijs Bonte for helping to identify this problem.

SEAWAT-2000 Version 3.11.01 2005/07/25 - This version of SEAWAT contains a bug
fix for head-dependent flux calculations for some boundary types.  Thanks to
Alyssa Dausman for helping to identify this bug.

SEAWAT-2000 Version 3.11.00 2005/04/29 - Added MODFLOW-2000 Version 1.15.00 and
MT3DMS Version 5.00.  Also added compatability between MNW wells and the VDF
Process for freshwater parts of a model domain.

SEAWAT-2000 Version 3.10.01 2004/03/30 - This version of SEAWAT contains a couple
of minor bug fixes from the previous version.

SEAWAT-2000 Version 3.10 2004/02/13 - This version of SEAWAT contains substantial
improvements over previous releases.  The program is now based on MODFLOW-2000
(Version 1.12.01) and MT3DMS (Version 4.500), and uses the concept of a process.
Details of SEAWAT-2000 are described in U.S. Geological Survey Open-File Report
03-426.

SEAWAT Version 2.12 2002/09/13 - Fixed problem with calculation of EVT fluid
density.  Thanks to Adam Taylor and Barclay Shoemaker.  Also fixed bug in
calculation of default riverbed thickness.  Thanks to Lou Motz and Nebiyu
Tiruneh from the University of Florida for locating this problem.

SEAWAT Version 2.11 2002/08/09 - Fixed bug that caused program to bomb 
for certain problems involving wetting and drying.  Thanks to Trayle Kulshan and
Steve Gorelick from Stanford University for help in locating this problem.

SEAWAT Version 2.10 2002/02/07 - Code consists of MODFLOW-88 and MT3DMS Version 
3.50.A.  Upgraded the CFACE subroutine with the improved CFACE subroutine from 
MT3DMS Version 4.00.  Reformulated flow equation to conserve fluid mass.  
Redesigned boundary conditions to represent variable-density flow.  Added an 
iterative method for coupling flow and transport.  Program redesigned as double 
precision.

SEAWAT Version 1.1 1998/05/01 - Initially released by Weixing Guo (Missimer 
International, Inc.) and Gordon D. Bennett (S.S. Papadopulos & Associates, Inc.)

DATA REQUIREMENTS
In order to use SEAWAT, initial conditions, hydraulic properties, and stresses 
must be specified for every model cell in the finite-difference grid.

OUTPUT OPTIONS
Primary output is head and concentration, which can be written to the listing 
file or to separate binary files.  Other output includes the complete listing of 
all input data, drawdown, flow budget, and transport budget data.  Flow budget 
data are printed as a summary in the listing file, and detailed budget data for 
all model cells can be written into a separate file.  All binary output is 
written to files that are opened with the FORM='BINARY' option.  This means that 
some pre- and post-processors may not be able to read the output unless the open 
statements are modified, the program is recompiled, and the model is rerun.

SYSTEM REQUIREMENTS
SEAWAT is written in Fortran 77 with the following extensions:  use of variable 
names longer than 6 characters, Fortran 90 statements for dynamic memory 
allocation, a call to SUBROUTINE GETARG to retrieve command-line arguments, and
two calls to DATE_AND_TIME, which is a Fortran 90 intrinsic subroutine. Generally, 
the program is easily installed on most computer systems.  The code has been used on 
DOS-based 386 or greater computers having a math coprocessor and 4 mb of memory.  
Parts of the GMG solver are written in the C programming language.

PROCESSES
GLO1 -- Global Process
GWF1 -- Ground-Water Flow Process
VDF1 -- Variable-Density Flow Process
OBS1 -- Observation Process
SEN1 -- Sensitivity Process
PES1 -- Parameter-Estimation Process
IMT1 -- Integrated MT3DMS Process

Process compatibility issues are described in the user's manual.  In general, the VDF 
and IMT Processes are not compatible with SEN and PES, and are only slightly 
compatible with OBS.  VDF is an alternative to GWF, and thus the two cannot be used
concurrently in a simulation. 

PACKAGES COMPATIBLE WITH THE VARIABLE-DENSITY FLOW (VDF) PROCESS
BAS6 -- Basic 
BCF6 -- Block-Centered Flow 
LPF -- Layer Property Flow 
HUF2 -- Hydrogeologic Unit Flow. Note that VDF is not yet compatible with 
        the Layer Variable-Direction Horizontal Anisotropy (LVDA) capability.
        The LVDA capability should not be used with the VDF process.  The VDF
        process is compatible with the three features described in Open-File
        Report 03-347.
HFB6 -- Hydraulic Flow Barrier
DRN -- Drain 
RIV -- River 
GHB -- General-Head Boundary 
EVT -- Evapotranspiration 
WEL -- Well
RCH -- Recharge 
CHD -- Time-Variant Constant Head 
FHB -- Flow and Head Boundary
MNW -- Multi-Node Well
ETS -- Evapotranspiration with a Segmented Function
DRT -- Drains with Return Flow
SIP -- Strongly Implicit Procedure
SOR -- Slice-Successive Overrelaxation
PCG -- Preconditioned Conjugate Gradient Solver (also called PCG2)
DE4 -- Direct Solver
GMG -- Geometric Multi-Grid Solver
OC -- Output Control Option
LMT6 -- Linkage with MT3DMS
BTN -- Basic Transport 
ADV -- Advection 
DSP -- Dispersion 
SSM -- Source/Sink Mixing 
RCT -- Reaction 
GCG -- Generalized Conjugate Gradient Solver
TOB -- Transport Observations
OBS -- Observation
HOB -- Hydraulic-Head Observation
GHOB -- General-Head Boundary Observation
DROB -- Drain Observation
RVOB -- River Observation
CHOB -- Constant-Head Flow Observation
DTOB -- Drain with Return Flow Observation

Other packages (distributed with MODFLOW-2000) are included in SEAWAT-2000, however,
these additional packages may not be compatible with the VDF Process.

DOCUMENTATION

The basic documentation is contained in the following three reports:

Langevin, C.D., Thorne, D.T., Jr., Dausman, A.M., Sukop, M.C., and Guo, W., 2007, 
SEAWAT Version 4: A Computer Program for Simulation of Multi-Species Solute and Heat 
Transport: U.S. Geological Survey Techniques and Methods. Book 6, Chapter A22, 39 p.

Langevin, C.D., Shoemaker, W.B., and Guo, W., 2003, MODFLOW-2000, the U.S. Geological
Survey Modular Ground-Water Model--Documentation of the SEAWAT-2000 Version with the
Variable-Density Flow Process (VDF) and the Integrated MT3DMS Transport Process (IMT):
U.S. Geological Survey OPen-File Report 03-426, 43 p.

Guo, W., and Langevin, C.D., 2002, User's guide to SEAWAT: A computer program for simulation
of three-dimensional variable-density ground-water flow: Techniques of Water-Resources 
Investigations of the U.S. Geological Survey, Book 6, Chapter A7, 77 p.

Users will also need documentation for MODFLOW-2000 and MT3DMS, and possibly the
references cited in those reports.

CONTACTS
Operation:

Christian Langevin
U.S. Geological Survey
411 National Center
Reston, VA 20192
langevin@usgs.gov


See
http://water.usgs.gov/software/ordering_documentation.html
for information on ordering printed copies of USGS publications.

Disclaimer

This program is public domain and is released on the condition that neither the U.S 
Geological Survey nor the United States Government may be held liable for any damages 
resulting from their authorized or unauthorized use. See also User Rights.
