|
|
The List Utility Module is used to read lists of data in a variety of packages.
|
|
|
•Harbaugh, A.W., Banta, E.R., Hill, M.C., and McDonald, M.G., 2000, MODFLOW-2000, the U.S. Geological Survey modular ground-water model -- User guide to modularization concepts and the Ground-Water Flow Process: U.S. Geological Survey Open-File Report 00-92, 121 p.
•RevisedMF2005Input.pdf |
|
|
•The List Utility Module is never used independently from packages so it does not have a separate symbol in the name file.
•Binary files can be read if they are EXTERNAL or OPEN/CLOSE as specified below. SFAC is not read for binary files. In Binary files the first list 3 values (layer, row, and column) must be Real numbers even though these values are actually Integers in the model. These values will be converted to Integers before use in the model. All auxiliary data must be included in the binary file. (MODFLOW-2005 only) |
Input Instructions
Module ULSTRD reads lists, which are any number of repetitions of an input item that contains multiple variables. Examples of packages that make use of this module are the General-Head Boundary, Drain, River, and Well Packages.
Data Set 1
|
[ EXTERNAL IN ] or [ OPEN/CLOSE FNAME]
If Item 1 is not included, then the list is read from the package file. Item 1 must begin with the keyword “EXTERNAL” or the keyword “OPEN/CLOSE” (not both).
IN—is the unit number for a file from which the list will be read. The name of the file associated with this file unit must be contained in the name file, and its file type must be “DATA” in the name file.—is the unit number for a file from which the list will be read. The name of the file associated with this file unit must be contained in the Name File, and its file type must be “DATA” or “DATA(BINARY)” in the Name File. The file will be read as binary if the file type in the Name File is specified as “DATA(BINARY)”. SFAC is not read if the list is read from a binary file.
|
FNAME—is the name of a file from which the list will be read. This file will be opened on unit 99 just before reading the list and closed immediately after the list is read. This file should not be included in the Name File. The keyword “(BINARY)” can specified after FNAME to indicate that the file is binary. SFAC is not read if the list is read from a binary file. The OPEN/CLOSE option is particularly useful for running simulations that require more than 99 files using a computer that allows only 99 files to be opened simultaneously.
|
|
|
Data Set 2
|
[ SFAC Scale]
Scale—is a scale factor that is multiplied times the value of one or more variables within every record of the list. The input instructions that define a list, which will be read by ULSTRD, should specify the variables to which SFAC applies. If Item 2 is not included, then Scale is 1.0. If Item 2 is included, it must begin with the keyword “SFAC.” The values of the list variables that are printed to the listing file include the effect of Scale. SFAC is not read if the list is read from a binary file.
|
|
Data Set 3
|
List—is a specified number of lines of data in which each line contains a specified number of variables. The first three variables are always layer, row, and column. The other fields vary according to which package is calling this module.
|
|
