RMA: Change MT3DMS Output Frequency

  • Scroll to top of this topic Scroll to Top of Page

  • Print the current topic Print Topic

  • No expanding elements on this page Show/Hide Expanders

When MODFLOW runs, it will divide each MODFLOW time step into multiple transport time steps. We will want to plot the development of the chloride plume so we need to make sure that the concentrations are saved at multiple times.

Select Model|MODFLOW Output Control and go to the MT3DMS tab. Change the controls so that the concentrations are saved every 5 transport steps.

MODFLOW Output Control Showing MT3DMS controls