Data Sets Required by PHAST |
Table 7. Data Sets required by PHAST
Active |
Specifies whether an element in PHAST is active or not. |
MEDIA, active |
always |
Kx |
Specifies the hydraulic conductivity in the X direction. |
MEDIA, Kx |
always |
Ky |
Specifies the hydraulic conductivity in the Y direction. |
MEDIA, Ky |
always |
Kz |
Specifies the hydraulic conductivity in the Z direction. |
MEDIA, Kz |
always |
Porosity |
Specifies the porosity. |
MEDIA, porosity |
always |
Specific_Storage |
Specifies the specific storage. |
MEDIA, specific_storage |
always |
Longitudinal_Dispersivity |
Specifies the longitudinal dispersivity. |
MEDIA, longitudinal_dispersivity |
Use solute transport checked in PHAST Chemistry Options dialog box |
Horizontal_Transverse_Dispersivity |
Specifies the horizontal transverse dispersivity. |
MEDIA, horizontal_dispersivity |
Use solute transport checked in PHAST Chemistry Options dialog box |
Vertical_Transverse_Dispersivity |
Specifies the vertical transverse dispersivity. |
MEDIA, vertical_dispersivity |
Use solute transport checked in PHAST Chemistry Options dialog box |
Initial_Head |
Specifies the initial head. |
HEAD_IC, head |
Neither Use free surface nor Use water table for initial condition checked in PHAST Free Surface dialog box |
Initial_Water_Table |
Specifies the initial water table. |
HEAD_IC, water_table |
Use free surface and Use water table for initial condition checked in PHAST Free Surface dialog box |
Chemistry_Initial_Solution |
Specifies the initial solution. |
CHEMISTRY_IC, solution |
Use solute transport in PHAST Chemistry Options dialog box |
Chemistry_Initial_Equilibrium_Phases |
Specifies the initial equilibrium phases. |
CHEMISTRY_IC, equilibrium_phases |
Use solute transport and Use equilibrium phases checked in PHAST Chemistry Options dialog box |
Chemistry_Initial_Surface |
Specifies the initial surface properties. |
CHEMISTRY_IC, surface |
Use solute transport and Use surface assemblages checked in PHAST Chemistry Options dialog box |
Chemistry_Initial_Exchange |
Specifies the initial exchange properties. |
CHEMISTRY_IC, exchange |
Use solute transport and Use exchange checked in PHAST Chemistry Options dialog box |
Chemistry_Initial_Gas_Phase |
Specifies the initial gas phase properties. |
CHEMISTRY_IC, gas_phase |
Use solute transport and Use gas phases checked in PHAST Chemistry Options dialog box |
Chemistry_Initial_Solid_Solutions |
Specifies the initial solid-solution properties. |
CHEMISTRY_IC, solid_solution |
Use solute transport and Use solid solution checked in PHAST Chemistry Options dialog box |
Chemistry_Initial_Kinetics |
Specifies the initial kinetic properties. |
CHEMISTRY_IC, kinetics |
Use solute transport and Use kinetics checked in PHAST Chemistry Options dialog box |
Print_Chemistry |
Specifies the "Print Chemistry" distribution. |
PRINT_LOCATIONS, chemistry |
Use solute transport checked in PHAST Chemistry Options dialog box |
Print_XYZ_Chemistry |
Specifies the "Print XYZ Chemistry" distribution. |
PRINT_LOCATIONS, xyz_chemistry |
Use solute transport checked in PHAST Chemistry Options dialog box |