A position in the stream cross-section for a discharge meaasurement where one or more current meter measurements are performed. The date and time that the vertical section was measured. The distance from the discharge measurement initial point. The default units are in feet. The width of the section, as measured, generally from half way to the previous section and half way to the next section. The default units are in feet. The depth of water at the discharge measurement sub-section. The default units are in feet. The cross-section area of the discharge measurement sub-section. The default units are in square feet. The stream discharge of the discharge measurement sub-section. The default units are in cubic feet per second. The coefficient to be applied to account for the angle of the streamflow to measurement section. The coefficient to be applied to account for the angle of angle of the meter suspension to the true vertical. The true vertical distance of the suspension cable (airline). This value is used to calculate the vertical angle coefficient. The default units are in feet. The distance of the cable underwater (wetline). The default units are in feet. The distance from the surface of the water to the bottom of the ice. A positive value indicates the water level is above the bottom of the ice. The default units are in feet. The difference between the total depth and the positive value of the vertical distance of the ice. The default units are in feet. The average measured velocity through the vertical section.The default units are in feet per second. The percentage the velocity estimate is of the next or previous section. The code identifying the origin of the estimated velocity. Comments about the section or the measurements in the section.