A type of discharge measurement where width, depth, and velocity measurments are performed in stations across the stream cross-section resulting in a calculated discharge. The code indicating the starting point (left or right edge of water) of this discharge measurement section. Indicates summary information only. No details are loaded. The version of the firmware the discharge measurement instrument is using. The version of the computer software used to compute the discharge. The code indicating the type of suspension of the velocity meter. The distance from the velocity meter to the weight, in feet. The default units are in feet. Was the velocity meter inspected before the measurement (true or false)? Was the velocity meter inspected after the measurement (true or false)? The code describing the type and size of suspension weight. The area of a stream cross-section. Thne default units are in square feet. The width of the stream cross-section, where the measurement takes place. The default units are in feet. The mean stream velocity in the cross-section at the measurement section. The default units are in feet per second. The number of sections measured in the discharge measurement. The average observation time, in seconds, of the velocity meter readings for a stream discharge measurement. The code indicating the type of velocity observations made during the measurement Was the horizontal angle coefficient used in the discharge measurement calculations (true or false)? Was the the method coefficient was used in the discharge measurement calculations (true or false)? Was the suspension coefficient was used in the discharge measurement calculations (true or false)? Indicates that the time of the ADCP was synchronized with the PC? Date and time the ADCP was synchronized. Indicates that the instrument was tested. Indicates that a compass calibration was completed. Is the ambiguity velocity of the Acoustic Doppler Current Profiler (ADCP) consistent for all transects?