State Water Resources Research Institute Program


Project ID: 2007ND151B
Title: Rapid and Sensitive Determination of Bacteria in Water Using Nanoparticles
Project Type: Research
Start Date: 3/01/2007
End Date: 2/29/2008
Congressional District: 1
Focus Categories: Water Quality, Methods, Treatment
Keywords: Detection of bacteria, fluorescent nanoparticles, antibody-antogen reaction, target bacteria cells
Principal Investigator: Zhao, Julia Xiaojun
Federal Funds: $ 12,000
Non-Federal Matching Funds: $ 24,000
Abstract: Bacteria can grow or re-grow in distribution systems of drinking water. In fact, potable water is a major source of some bacteria colonization, for example L. pneumophila and E coli. etc. The L. pneumophila in potable water can replicate rapidly and increase in virulence. The British Communicable Disease Surveillance Center reported that 19 of 20 hospital outbreaks of Legionnaires' Disease in the United Kingdom from 1980 to 1992 were attributed to the Legionella-contaminated potable water. Given the low infectious dose of pathogenic bacteria, the presence of even a single bacterium in potable water may pose a serious health risk. Therefore, sensitive and rapid detection of bacteria in water is critical. However, the current definitive method for the detection of bacteria is by using the culture of the organism, which requires about 24 hours for bacterial growth. The method is too slow. The PCR-based method can detect bacteria within six hours; but the method requires pre-enrichment of the target bacteria. The objective of this proposal is to develop a rapid and ultra-sensitive method for the specific identification and quantitative determination of pathogenic bacteria in water. The major feature of the proposed method is the employment of fluorescent nanoparticles as target bacteria identifiers that could emit strong fluorescent signals. The method will consist of three major steps. First, the nanoparticles need to react with a specific antibody to form a conjugate of nanoparticle-antibody (NP-Ab). Second, based on the antibody-antigen reaction, the NP-Ab conjugates have to identify target bacteria cells from a sample by attaching the NP-Ab to the bacteria surface antigen. Third, target bacteria need to be qualitatively and quantitatively determined by measuring the fluorescence intensity and wavelength.

Progress/Completion Report, PDF

Accessibility FOIA Privacy Policies and Notices

Take Pride in America logo USA.gov logo U.S. Department of the Interior | U.S. Geological Survey
URL: http://water.usgs.gov/wrri/07grants/2007ND151B.html
Page Contact Information: Earl Greene
Page Last Modified: Tuesday, 15-Jan-2013 00:05:25 EST