May 29, 1997 RADMOD - Version: 1.1 1996/01/19 A preprocessor to the program MODFLOW for simulation of axisymmetric problems For assistance, enhancement requests, or bug reports contact the Hydrologic Analysis Software Support Team via email at h2osoft@usgs.gov. See the file doc/radmod.txt for descriptions, references, and additional contacts for this software. Instructions for installation, execution, and testing are provided below. TABLE OF CONTENTS A. FILES B. EXTRACTING FILES C. COMPILING D. INSTALLING E. RUNNING THE SOFTWARE F. TESTING A. FILES The following distribution packages (containing the software, test data sets, and information files) are currently available for UNIX systems: radmod_1.1.DGUX.tar.gz - Compiled for Data General AViiON under DG/UX 5.4 radmod_1.1.Solaris.tar.gz - Compiled for Sun UltraSPARC 2 under Solaris 2.5 radmod_1.1.SGI.tar.gz - Compiled for Silicon Graphics Indigo (32-bit) under Irix Release 6.0.1 radmod_1.1.source.tar.gz - Source code Included in directory radmod_1.1/doc is a Portable Document Format (PDF) version of the RADMOD documentation (ofr96659.pdf). A PostScript version of this report is available from: http://water.usgs.gov/software/radmod.html The PDF file is readable and printable on various computer platforms using Acrobat Reader from Adobe. The Acrobat Reader is freely available from the following World Wide Web sites: http://www.adobe.com/ http://www.shareware.com/ and by File Transfer Protocol (FTP) from the following site: ftp.adobe.com (path: /pub/adobe/acrobat) B. EXTRACTING FILES The compressed tar file, named radmod_1.1.OS.tar.gz, contains all the files needed to install and test RADMOD on a computer with a particular operating system, where OS is a string indicating the operating system the distribution is intended for. If a version is not available for your operating system, the file radmod_1.1.source.tar.gz contains the source code and all other files needed to compile, install, and test the software on a UNIX-based computer. For either type of distribution, the directory radmod_1.1 is created (or overwritten) when the files are extracted from the tar file. If the radmod_1.1 directory already exists, you may want to delete or rename it before extracting the files. The following are the steps to extract the files from a distribution tar file. 1. If the tar file is not already in the directory under which you want the distribution installed, move it there. For example: mv radmod_1.1.____.tar.gz /usr/opt/wrdapp 2. If you are not in the directory where the tar file is located, go there. For example: cd /usr/opt/wrdapp 3. Uncompress the distribution file. For example: gunzip radmod_1.1.____.tar.gz 4. Extract the distribution files from the tar file. For example: tar -xof radmod_1.1.___.tar This creates the following directory structure (the contents of each directory are shown to the right): radmod_1.1 ; copy of this README file `-----bin ; compiled executable `-----doc ; documentation files (manual page, update notes) `-----src ; Makefile and source code `-----test ; scripts to run verification tests `-----data ; standard data sets used in verification tests Notes: a) The bin directory is not included in the radmod_1.1.source.tar.gz distribution (it is created during compilation). b) Source code is included only with the radmod_1.1.source.tar.gz distribution. c) It is recommended that no user files be kept in the radmod_1.1 directory structure. If you do plan to put files in the radmod_1.1 directory structure, do so only by creating subdirectories of radmod_1.1. C. COMPILING If a compiled version of the software is not available for your computer, or if you want to build the executable yourself, follow the instructions in this section. If you have retrieved a pre-compiled distribution of the software, skip to the Installing section below. The source code is provided in the radmod_1.1.source.tar.gz distribution so that users can generate the executable themselves. No support can be provided for users generating their own versions of the software. In general, the requirements are a Fortran compiler and a minimal level of knowledge of the compiler and the UNIX operating system. As provided, the Makefile and source code are set up for use on Data General AViiON workstations running the DG/UX operating system. To generate a new executable, do the following: 1. Change directory to the source directory: cd radmod_1.1/src 2. Modify the beginning of the file named Makefile to correctly specify system-dependent variables: F77 Fortran compiler name FFLAGS Fortran compiler flags 3. Use the make program to initiate compilation of the source code and installation of the software: make [BINDIR=directory_for_links] See the Installing instructions below for an explanation of BINDIR. The make will: a. create the directories radmod_1.1/bin and BINDIR if they do not already exist, b. compile the source code, c. place the executable (radmod) in radmod_1.1/bin, and d. place a link to the executable in BINDIR if specified. D. INSTALLING To make the executable (radmod) easy to use, it should be installed in a directory included in the user's search path. The Makefile (input instructions to the UNIX make program--located in radmod_1.1/src) contains instructions to optionally place a link in a specified directory to the executable contained in radmod_1.1/bin. Use the following two commands to do this: cd radmod_1.1/src make install [BINDIR=directory_for_links] If BINDIR is specified, a link to the executable is placed in the specified directory. For example, if your search path consists of: /usr/bin:/usr/opt/bin:/usr/local/bin use the command: make install BINDIR=/usr/local/bin to make the executable accessible from any directory without requiring the full pathname of the software's location. Notes: a) Brackets "[xxx]" are used to indicate optional arguments to commands. b) To create and delete a link to the RADMOD executable file, the installer must have sufficient rights in the directory that BINDIR is set to. E. RUNNING THE SOFTWARE After RADMOD is properly installed in a directory that is included in your PATH, it can be executed with the command "radmod". The program prompts for the name of the file containing the input data for the RADMOD program and then for the names of the two output files (GFD and later grid spacing output). F. TESTING A test data set is provided to verify that the program is correctly installed and running on the system. The test may also be looked at as an example of how to use the program. The directory "radmod_1.1/test" contains the scripts to run the test. The directory "radmod_1.1/data" contains the input data and expected results for the test. The test is usually run in the directory "radmod_1.1/test", but it can be run in any user directory if the installation procedure was completed (make install performed). To test the installation, change to the radmod_1.1/test directory and type the command: ./test.sh If running from another directory, specify the full path to the script; for example: /usr/opt/wrdapp/radmod_1.1/test/test.sh To test the installation, change to the radmod_1.1/test directory and type the command: ./test.sh After the test is completed, the results are compared to the expected results. If all goes well, the only differences will be due to different processing times or pathnames. To clean up after the tests, type the command: ./clean.sh NOTE: the standard data sets were created on a Data General AViiON workstation. You may notice slight numeric differences in the results on other computers. These are generally due to different round-off algorithms and the different architecture of the central processing unit chip. The test is described in the table below. Test is the test number, program is the program used to run the test, and the usage column indicates how a file is used, with i for input, o for output, and i/o for both input and output. test program description of test and files file name & usage ---- ------- ------------------------------------- ----------------- 1 RADMOD NEUMAN data RADMOD input file neuman.dat i GFD output neuman.gfd o lateral grid spacing output neuman.grd o capture of message to screen neuman.log o * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * Good Luck! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *