<?xml version="1.0" encoding="UTF-8"?>
<?xml-stylesheet type="text/xsl" href="fgdc_classic.xsl"?>
<metadata xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="http://water.usgs.gov/GIS/metadata/usgswrd/fgdc-std-001-1998.xsd">
	<idinfo>
		<citation>
			<citeinfo>
				<origin>Adams, Gregory P.</origin>
				<origin>Runkle, Donna</origin>
				<origin>Rea, Alan</origin>
				<origin>Cederstrand, Joel. R.</origin>
				<pubdate>1997</pubdate>
				<title>Digital data sets that describe aquifer characteristics of the alluvial and terrace deposits along the Cimarron River from Freedom to Guthrie in northwestern Oklahoma</title>
				<edition>1.0</edition>
				<geoform>map</geoform>
				<serinfo>
					<sername>Open-File Report</sername>
					<issue>96-445</issue>
				</serinfo>
					<pubinfo>
				<pubplace>Reston, VA</pubplace>
				<publish>U.S. Geological Survey</publish>
				</pubinfo>
				<onlink>http://water.usgs.gov/lookup/getspatial?ofr96-445_wlelev</onlink>
			</citeinfo>
		</citation>
		<descript>
			<abstract>This data set consists of digital water-level elevation contours
for the alluvial and terrace deposits along the Cimarron River
in northwestern Oklahoma during 1985-86. Ground water in 1,305
square miles of Quaternary-age alluvial and terrace deposits
along the the Cimarron River from Freedom to Guthrie is an
important source of water for irrigation, industrial, municipal,
stock, and domestic supplies. Alluvial and terrace deposits are
composed of interfingering lenses of clay, sandy clay, and
cross-bedded poorly sorted sand and gravel. The aquifer is
composed of hydraulically connected alluvial and terrace
deposits that unconformably overlie the Permian-age Formations.

Water-level elevations measured in 1985 and 1986 ranged from
1,650 feet to 950 feet above sea level. Regional ground-water
flow is generally southeast to southwest towards the Cimarron
River, except where the flow direction is affected by perennial
tributaries. The water-level elevation contours were digitized
from a mylar map at a scale of 1:250,000. The maps were
published at a scale of 1:900,000.
			</abstract>
			<purpose>This data set was created for a project to develop data sets to
support ground-water vulnerability analysis. The objective was
to create and document a digital geospatial data set from a
published report or map, or existing digital geospatial data
set that could be used in ground-water vulnerability analysis.
			</purpose>
			<supplinf>Introduction --

This data set consists of digital water-level elevation contours
for the alluvial and terrace deposits along the Cimarron River
in northwestern Oklahoma during 1985-86. Ground water in 1,305
square miles of Quaternary-age alluvial and terrace deposits
along the the Cimarron River from Freedom to Guthrie is an
important source of water for irrigation, industrial, municipal,
stock, and domestic supplies. Alluvial and terrace deposits are
composed of interfingering lenses of clay, sandy clay, and
cross-bedded poorly sorted sand and gravel. The aquifer is
composed of hydraulically connected alluvial and terrace
deposits that unconformably overlie the Permian-age Formations
(Adams and Bergman, 1996).

In this report, elevation refers to distance above sea level and
sea level refers to the National Geodetic Vertical Datum of 1929
(NGVD29)--a geodetic datum derived from a general adjustment of
the first-order level nets of both the United States and Canada,
formerly called Sea Level Datum of 1929. Water-level elevations
measured in 1985 and 1986 ranged from 1,650 feet to 950 feet
above sea level. Regional ground-water flow is generally
southeast to southwest towards the Cimarron River, except where
the flow direction is affected by perennial tributaries (Adams
and Bergman, 1996).

The water-level elevation contours were digitized from a mylar
map at a scale of 1:250,000 from the U.S. Geological Survey
publication, "Geohydrology of alluvium and terrace deposits of
the Cimarron River from Freedom to Guthrie, Oklahoma" by Adams
and Bergman (1996). The maps were published at a scale of
1:900,000.

Reviews Applied to Data --

This electronic report was subjected to the same review standard
that applies to all U.S. Geological Survey reports. Reviewers
were asked to check the topological consistency, tolerances,
attribute frequencies and statistics, projection, and geographic
extent. Reviewers were given digital data sets and paper plots
for checking against the source maps to verify the linework and
attributes. The reviewers checked the metadata and a_readme.1st
files for completeness and accuracy.

Related Spatial and Tabular Data Sets --

This data set is one of four digital map data sets being published
together for this aquifer. The four data sets are:

&gt;              aqbound -  aquifer boundaries

&gt;              cond    -  hydraulic conductivity

&gt;              recharg -  aquifer recharge

&gt;              wlelev  -  water-level elevation contours

Digital map data sets of the Oklahoma surficial geology
digitized from 1:250,000-scale maps (or 1:125,000-scale maps for
the three Oklahoma panhandle counties) are published separately.

Other References Cited --

Adams, G.P., and Bergman, D.L., 1996, Geohydrology of alluvium and
terrace deposits of the Cimarron River from Freedom to Guthrie,
Oklahoma: U.S. Geological Survey Water-Resources Investigations
Report 95-4066, 57 p.

Environmental Systems Research Institute, Inc. (ESRI), 1995,
ARC/INFO Command Reference, ARC/INFO On-line manuals: Redlands,
CA.

Notes --

Any use of trade, product, or firm names is for descriptive
purposes only and does not imply endorsement by the U.S.
Government.

Although this data set has been used by the U.S. Geological
Survey, U.S. Department of the Interior, no warranty expressed or
implied is made by the U.S. Geological Survey as to the accuracy
of the data and related materials.

The act of distribution shall not constitute any such warranty,
and no responsibility is assumed by the U.S. Geological Survey in
the use of this data, software, or related materials.
			</supplinf>
		</descript>
		<timeperd>
			<timeinfo>
				<rngdates>
					<begdate>1985</begdate>
					<enddate>1986</enddate>
				</rngdates>
			</timeinfo>
			<current>Ground condition</current>
		</timeperd>
		<status>
			<progress>Complete</progress>
			<update>None planned</update>
		</status>
		<spdom>
			<bounding>
				<westbc>-99.0721</westbc>
				<eastbc>-97.5609</eastbc>
				<northbc>36.8137</northbc>
				<southbc>35.8204</southbc>
			</bounding>
		</spdom>
		<keywords>
			<theme>
				<themekt>none</themekt>
				<themekey>ground-water vulnerability</themekey>
				<themekey>groundwater vulnerability</themekey>
				<themekey>aquifers</themekey>
				<themekey>ground water</themekey>
				<themekey>groundwater</themekey>
				<themekey>Cimarron alluvial and terrace aquifer</themekey>
				<themekey>Cimarron River alluvial and terrace aquifer</themekey>
				<themekey>Cimarron River terrace aquifer</themekey>
				<themekey>Cimarron River aquifer</themekey>
				<themekey>Cimarron River alluvial aquifer</themekey>
				<themekey>Cimarron alluvial aquifer</themekey>
				<themekey>Cimarron aquifer</themekey>
				<themekey>terrace aquifer</themekey>
				<themekey>alluvial aquifer</themekey>
				<themekey>ground-water levels</themekey>
				<themekey>groundwater levels</themekey>
				<themekey>water levels</themekey>
				<themekey>ground-water level elevation</themekey>
				<themekey>groundwater level elevation</themekey>
				<themekey>ground-water level elevation contours</themekey>
				<themekey>groundwater level elevation contours</themekey>
				<themekey>water-level elevation contours</themekey>
				<themekey>water level elevation contours</themekey>
				<themekey>water-level contours</themekey>
				<themekey>water level contours</themekey>
				<themekey>water-level elevation</themekey>
				<themekey>water level elevation</themekey>
				<themekey>inlandWaters</themekey>
			</theme>
			<place>
				<placekt>none</placekt>
				<placekey>northwest Oklahoma</placekey>
			</place>
		</keywords>
		<accconst>None.</accconst>
		<useconst>This data set was digitized from a map published at a scale of
1:250,000. The map represents the elevation of the water
levels in the alluvial and terrace deposits along the Cimarron
River from Freedom to Guthrie, Oklahoma, in 1985-86.Water-level
elevations represented at this scale are indicative of broad,
regional trends and should not be interpreted as site
specific. The water-level elevation contours were digitized
from a mylar-source map (33 inches by 31 inches or 84
centimeters by 79 centimeters), with a root-mean-squared-error
(RMSE) of 0.008 map inches (0.020 map centimeters) or 167.49
feet (51.05 meters) ground distance.
		</useconst>
		<ptcontac>
			<cntinfo>
				<cntperp>
					<cntper>Donna L. Runkle</cntper>
					<cntorg>U.S. Geological Survey</cntorg>
				</cntperp>
				<cntpos>Hydrologist</cntpos>
				<cntaddr>
					<addrtype>mailing address</addrtype>
					<address>202 NW 66th St., Bldg. 7</address>
					<city>Oklahoma City</city>
					<state>Oklahoma</state>
					<postal>73116</postal>
					<country>United States of America</country>
				</cntaddr>
				<cntvoice>1-888-275-8747</cntvoice>
				<cntfax>(405) 843-7712</cntfax>
				<cntemail>dlrunkle@usgs.gov</cntemail>
				<cntinst>none</cntinst>
			</cntinfo>
		</ptcontac>
		<browse>
			<browsen>http://water.usgs.gov/lookup/get?OFR96-445/browse.gif</browsen>
			<browsed>A browse image of the four aquifer data sets.</browsed>
			<browset>GIF</browset>
		</browse>
		<datacred>Compilation of this data set and the associated metadata was funded
under a cooperative Joint Funding Agreement between the
U.S. Geological Survey and the State of Oklahoma, Office of the
Secretary of Environment.
		</datacred>
		<secinfo>
			<secsys>Public</secsys>
			<secclass>UNCLASSIFIED</secclass>
			<sechandl>None</sechandl>
		</secinfo>
		<native>Operating System-- UNIX, ARC/INFO Version 7.0.3,(Mon Mar 13 22:21:55 PST 1995)
		</native>
	</idinfo>
	<dataqual>
		<logic>Chain-node topology present.</logic>
		<complete>This data set includes the water-level contours published on figure
8, page 18 by Adams and Bergman (1996).
		</complete>
		<posacc>
			<horizpa>
				<horizpar>None</horizpar>
				<qhorizpa>
					<horizpav>64 meters</horizpav>
					<horizpae>Resolution as reported</horizpae>
				</qhorizpa>
			</horizpa>
			<vertacc>
				<vertaccr>None.</vertaccr>
			</vertacc>
		</posacc>
		<lineage>
			<procstep>
				<procdesc>The water-level contours were digitized in three sessions with a
maximum root-mean-squared error (RMSE) of 0.008 inches (0.020
centimeters) map distance or 167.49 feet (51.05 meters) ground
distance. The contours were extended or clipped to meet the aquifer
boundaries of the associated AQBOUND data set. The data set was edited
to delete extraneous pseudo and dangle nodes. The ARC/INFO CLEAN
command (ESRI, 1995), was used with a dangle length of 3,281 feet
(1,000 meters) and fuzzy tolerance of 328 feet (100 meters).
				</procdesc>
				<procdate>1996</procdate>
			</procstep>
			<procstep>
				<procdesc>The registration tics used in the initial digitizing were township and
range corners taken from 1:24,000-scale topographic maps. A comparison
of a paper plot of the data set with the source map showed that the
registration tics were not in the same locations on the
1:250,000-scale source map. To correct the problem, four
1:250,000-scale U.S. Geological Survey quadrangle maps were registered
using latitudinal and longitudinal tics, with a maximum
root-mean-squared-error (RMSE) of 0.003 inches (0.008 centimeters) map
distance or 69.09 feet (21.06 meters) ground distance. Forty-four
registration tics were selected and digitized from the quadrangle
maps, and given the same tic identification numbers as the tics used
initially. These new tics were used with the ARC/INFO TRANSFORM
command (ESRI, 1995) to adjust the digitized tics to more closely
match the source map. The root-mean-squared-error (RMSE) for TRANSFORM
was 189.3 feet (57.7 meters) ground distance.
				</procdesc>
				<procdate>1996</procdate>
			</procstep>
			<procstep>
				<procdesc>The data set was changed from double to single precision with the
ARC/INFO COPY (single) command (ESRI, 1995). The ARC/INFO CLEAN
command (ESRI, 1995), was used to process the data set with a dangle
length of 0.0 feet or meters and fuzzy tolerance of 53.8 feet (16.4
meters). Water-level elevation contours were attributed for ELEV and
LTYPE. Verification of attribute codes were made by comparing a paper
plot of the data set with the source map.
				</procdesc>
				<procdate>1996</procdate>
			</procstep>
		</lineage>
	</dataqual>
	<spdoinfo>
		<direct>Vector</direct>
		<ptvctinf>
			<sdtsterm>
				<sdtstype>Point</sdtstype>
			</sdtsterm>
			<sdtsterm>
				<sdtstype>String</sdtstype>
				<ptvctcnt>53</ptvctcnt>
			</sdtsterm>
			<sdtsterm>
				<sdtstype>GT-polygon composed of chains</sdtstype>
			</sdtsterm>
		</ptvctinf>
	</spdoinfo>
	<spref>
		<horizsys>
			<planar>
				<mapproj>
					<mapprojn>Albers Conical Equal Area</mapprojn>
					<albers>
						<stdparll>29.5</stdparll>
						<stdparll>45.5</stdparll>
						<longcm>-96</longcm>
						<latprjo>23</latprjo>
						<feast>0.0</feast>
						<fnorth>0.0</fnorth>
					</albers>
				</mapproj>
				<planci>
					<plance>coordinate pair</plance>
					<coordrep>
						<absres>64 meters</absres>
						<ordres>64 meters</ordres>
					</coordrep>
					<plandu>METERS</plandu>
				</planci>
			</planar>
			<geodetic>
				<horizdn>North American Datum of 1983</horizdn>
				<ellips>Geodetic Reference System 80</ellips>
				<semiaxis>6378137</semiaxis>
				<denflat>298.257</denflat>
			</geodetic>
		</horizsys>
	</spref>
	<eainfo>
		<detailed>
			<enttyp>
				<enttypl>WLELEV.AAT</enttypl>
				<enttypd>Arc attribute table</enttypd>
				<enttypds>ARC/INFO</enttypds>
			</enttyp>
			<attr>
				<attrlabl>-</attrlabl>
				<attrdef>Arc attribute table</attrdef>
				<attrdefs>ARC/INFO</attrdefs>
				<attrdomv>
					<edom>
						<edomv>-</edomv>
						<edomvd>n/a</edomvd>
						<edomvds>n/a</edomvds>
					</edom>
				</attrdomv>
			</attr>
			<attr>
				<attrlabl>FNODE#</attrlabl>
				<attrdef>Internal number of from-node</attrdef>
				<attrdefs>Computed</attrdefs>
				<attrdomv>
					<edom>
						<edomv>Sequential unique positive integer</edomv>
						<edomvd>n/a</edomvd>
						<edomvds>n/a</edomvds>
					</edom>
				</attrdomv>
			</attr>
			<attr>
				<attrlabl>TNODE#</attrlabl>
				<attrdef>Internal number of to-node</attrdef>
				<attrdefs>Computed</attrdefs>
				<attrdomv>
					<edom>
						<edomv>Sequential unique positive integer</edomv>
						<edomvd>n/a</edomvd>
						<edomvds>n/a</edomvds>
					</edom>
				</attrdomv>
			</attr>
			<attr>
				<attrlabl>LPOLY#</attrlabl>
				<attrdef>Internal number of polygon to left of arc</attrdef>
				<attrdefs>Computed</attrdefs>
				<attrdomv>
					<edom>
						<edomv>Sequential unique positive integer</edomv>
						<edomvd>n/a</edomvd>
						<edomvds>n/a</edomvds>
					</edom>
				</attrdomv>
			</attr>
			<attr>
				<attrlabl>RPOLY#</attrlabl>
				<attrdef>Internal number of polygon to right of arc</attrdef>
				<attrdefs>Computed</attrdefs>
				<attrdomv>
					<edom>
						<edomv>Sequential unique positive integer</edomv>
						<edomvd>n/a</edomvd>
						<edomvds>n/a</edomvds>
					</edom>
				</attrdomv>
			</attr>
			<attr>
				<attrlabl>LENGTH</attrlabl>
				<attrdef>Length of arc in coverage units</attrdef>
				<attrdefs>Computed</attrdefs>
				<attrdomv>
					<edom>
						<edomv>Positive real numbers</edomv>
						<edomvd>n/a</edomvd>
						<edomvds>n/a</edomvds>
					</edom>
				</attrdomv>
			</attr>
			<attr>
				<attrlabl>WLELEV#</attrlabl>
				<attrdef>Internal feature number</attrdef>
				<attrdefs>Computed</attrdefs>
				<attrdomv>
					<edom>
						<edomv>Sequential unique positive integer</edomv>
						<edomvd>n/a</edomvd>
						<edomvds>n/a</edomvds>
					</edom>
				</attrdomv>
			</attr>
			<attr>
				<attrlabl>WLELEV-ID</attrlabl>
				<attrdef>User-assigned feature number</attrdef>
				<attrdefs>User-defined</attrdefs>
				<attrdomv>
					<edom>
						<edomv>Integer</edomv>
						<edomvd>n/a</edomvd>
						<edomvds>n/a</edomvds>
					</edom>
				</attrdomv>
			</attr>
			<attr>
				<attrlabl>ELEV</attrlabl>
				<attrdef>Water-level contour elevation in feet above NGVD29</attrdef>
				<attrdefs>Adams and Bergman (1996)</attrdefs>
				<attrdomv>
					<rdom>
						<rdommin>950</rdommin>
						<rdommax>1,650</rdommax>
					</rdom>
				</attrdomv>
			</attr>
			<attr>
				<attrlabl>MAJOR1</attrlabl>
				<attrdef>Water-level contour elevation in feet above NGVD29</attrdef>
				<attrdefs>Adams and Bergman (1996)</attrdefs>
				<attrdomv>
					<rdom>
						<rdommin>950</rdommin>
						<rdommax>1,650</rdommax>
					</rdom>
				</attrdomv>
			</attr>
			<attr>
				<attrlabl>LTYPE</attrlabl>
				<attrdef>Line type</attrdef>
				<attrdefs>Adams and Bergman (1996)</attrdefs>
				<attrdomv>
					<edom>
						<edomv>1, 2</edomv>
						<edomvd>n/a</edomvd>
						<edomvds>n/a</edomvds>
					</edom>
				</attrdomv>
			</attr>
			<attr>
				<attrlabl>MINOR1</attrlabl>
				<attrdef>Line type</attrdef>
				<attrdefs>Adams and Bergman (1996)</attrdefs>
				<attrdomv>
					<edom>
						<edomv>1, 2</edomv>
						<edomvd>n/a</edomvd>
						<edomvds>n/a</edomvds>
					</edom>
				</attrdomv>
			</attr>
		</detailed>
		<overview>
			<eaover>Two attributes are associated with each line in this digital data
set. The first attribute, ELEV, contains the elevation of the
water-level contour, expressed in feet above the National Geodetic
Vertical Datum of 1929 (NGVD29). The second attribute, LTYPE, contains
the code 1, indicating the line is solid or the code 2, indicating the
line is dashed on the source map. ELEV is stored in the first major
code (MAJOR1) for lines, and LTYPE is stored in the first minor code
(MINOR1) in the Digital Line Graph (DLG) version of this data set.
			</eaover>
			<eadetcit>See overview.</eadetcit>
		</overview>
	</eainfo>
	<distinfo>
		<distrib>
			<cntinfo>
				<cntorgp>
					<cntorg>U.S. Geological Survey</cntorg>
				</cntorgp>
				<cntpos>Ask USGS - Water Webserver Team</cntpos>
				<cntaddr>
					<addrtype>mailing</addrtype>
					<address>445 National Center</address>
					<city>Reston</city>
					<state>VA</state>
					<postal>20192</postal>
				</cntaddr>
				<cntvoice>1-888-275-8747 (1-888-ASK-USGS)</cntvoice>
				<cntemail>http://answers.usgs.gov/cgi-bin/gsanswers?pemail=h2oteam&amp;subject=GIS+Dataset+ofr96-445_wlelev</cntemail>
			</cntinfo>
		</distrib>
		<distliab>Although this data set has been used by the U.S. Geological
Survey, U.S. Department of the Interior, no warranty expressed or
implied is made by the U.S. Geological Survey as to the accuracy
of the data and related materials. The act of distribution shall not 
constitute any such warranty, and no responsibility is assumed by 
the U.S. Geological Survey in the use of this data, software, or 
related materials.

Any use of trade, product, or firm names is for descriptive
purposes only and does not imply endorsement by the U.S.
Government.</distliab>
		<stdorder>
			<digform>
				<digtinfo>
					<formname>Export</formname>
					<formcont>Full coverage</formcont>
					<filedec>zipped</filedec>
					<transize>1</transize>
				</digtinfo>
				<digtopt>
					<onlinopt>
						<computer>
							<networka>
								<networkr>http://water.usgs.gov/GIS/dsdl/ofr96-445_wlelev.e00.gz</networkr>
							</networka>
						</computer>
					</onlinopt>
				</digtopt>
			</digform>
			<digform>
				<digtinfo>
					<formname>Other</formname>
					<formcont>DLG file format</formcont>
					<filedec>zipped</filedec>
					<transize>1</transize>
				</digtinfo>
				<digtopt>
					<onlinopt>
						<computer>
							<networka>
								<networkr>http://water.usgs.gov/GIS/dsdl/ofr96-445_wlelev.dlg.gz</networkr>
							</networka>
						</computer>
					</onlinopt>
				</digtopt>
			</digform>
			<fees>None. This dataset is provided by USGS as a public service.</fees>
		</stdorder>
	</distinfo>
	<metainfo>
		<metd>20041108</metd>
		<metc>
			<cntinfo>
				<cntorgp>
					<cntorg>U.S. Geological Survey</cntorg>
				</cntorgp>
				<cntpos>Ask USGS -- Water Webserver Team</cntpos>
				<cntaddr>
					<addrtype>mailing</addrtype>
					<address>445 National Center</address>
					<city>Reston</city>
					<state>VA</state>
					<postal>20192</postal>
				</cntaddr>
				<cntvoice>1-888-275-8747 (1-888-ASK-USGS)</cntvoice>
				<cntemail>http://answers.usgs.gov/cgi-bin/gsanswers?pemail=h2oteam&amp;subject=GIS+Dataset+ofr96-445_wlelev</cntemail>
			</cntinfo>
		</metc>
		<metstdn>FGDC Content Standards for Digital Geospatial Metadata</metstdn>
		<metstdv>FGDC-STD-001-1998</metstdv>
	</metainfo>
</metadata>
